Mount the SCOPIA
100
Gateway Unit in a 19" Rack (Optional)
7
M
OUNT
THE
SCOPIA
100
G
ATEWAY
U
NIT
IN
A
19" R
ACK
(O
PTIONAL
)
You can optionally mount the SCOPIA
100
Gateway unit in a
standard 19-inch rack. Two mounting brackets and a set of
screws are included in the SCOPIA
100
Gateway unit shipping
box.
Procedure
1.
Disconnect all cables including the power cables.
2.
Place the SCOPIA
100
Gateway unit right-side up
on a hard flat surface, with the front panel facing
you.
3.
Position a mounting bracket over the mounting
holes on each side of the SCOPIA
100
Gateway
unit.
Figure 1
Fitting a Bracket for Rack
Mounting
4.
Pass the screws through the brackets and tighten
them into the screw holes on each side of the
SCOPIA
100
Gateway unit using a suitable
screwdriver.
