Rado A100, Instruction Manual

Page: 6 / 20

4
1.2 Fan speed
Displays the actual value of the fan speed. In case the fan speed value drops under a set
value, the icon will turn red and an acous c signal will sound. To set the speed limit, pre-
ss the fan icon and change the speed value a er the numerical entry dialogue appears.
Con
fi rm the se ngs by pressing the OK key.
1.3 Daily hectare-meter
Displays the actual state of the sown area up to a maximal value of 99.9 ha. The dis-
played value can be reset by shortly pressing the daily hectare-meter indicator.
1.4 Summary hectare-meter
Displays the total sown area. This value cannot be reset by the user. Rese ng is possible
only by a service interven on.
1.5 SH1 and SH2 sensors of seed level in hoppers
Displays the actual state of seed in the hopper. When the seed level drops below the
level of the sensor
fi ed in the hopper, the empty hopper symbol will turn red and an
acous c signal will sound.
1.6 Level sensors adjustment
On the sensor rear side there is a small screw under which the adjus ng screw of the
sensor sensi vity is located.
1.7 A1 sensor of seeding
Displays the actual state of seed passing to the seeding hoses.
• In case the seed is passing through the seeding sensor, a green box symbol is dis-
played in the corresponding posi on.
• In case the seed is not passing through the par cular sensor, a yellow box symbol is
displayed in the corresponding posi on.
• In case the sensor is not connected, is not communica ng or it is faulty or damaged,
a red box symbol is displayed in the corresponding posi on.
1.8 Actual date and time
Displays the actual me. The me is set automa cally according to the tablet system
me and is corrected by the GPS/Glonass signal during the opera on. In case the GPS/
Glonass signal is unavailable, the me is synchronized with the tablet me upon the
entry into the second screen.