RADLEY RW2500, User Manual

Page: 24 / 102

17
Water that passes through this unit is not drinking water safe.
DANGER!
NEVER direct the water flow at people. The high pressure jet
can be dangerous if misused and must not be directed at people,
animals, electrical devices or the unit itself. DO NOT TREAT FLUID
INJECTION AS A SIMPLE CUT! Seek medical help immediately.
Note
If recoil starting, return the starter grip slowly by hand, do not let it
snap back.
4.1 RECOIL ENGINE START
1. Turn on water supply to full.
2. Purge the air from the pump by releasing the safety and squeezing the
trigger of the spray gun until there is a steady stream of water and no air
coming through.
3. Ensure the engine switch is in the ON position. It is an automatic reset
switch, do not push or hold it while starting the engine.
4. Push the primer bulb fully 3 times. Do not prime more than 3 times or you
may flood the engine. After 3 attempts wait for the gas to drain before
trying again.
5. Pull the recoil starter slowly until resistance is felt, then pull rapidly.
1 2 3
4 5