RADLEY RW2500, User Manual

Page: 21 / 102

14
RW SERIES
HOOK UP THE WATER SUPPLY HOSE
1. Run water through the garden hose to clear out any debris.
2. Inspect the water inlet screen to ensure it is in place and free of debris.
3. Connect the garden hose by threading it onto the pump. Connect the other
side to the outdoor tap. Use the shortest hose possible to complete the
job, do not use a hose longer than 50 feet (15.2m).
4. Hand tighten the fitting onto the hose.
5. Turn the water on and inspect for leaks.
6. Squeeze the trigger on the gun and allow any air to bleed out of the system
before starting the engine.
Note
Do not operate the pressure washer with missing or damaged inlet
screen
Do not start the engine without the water supply connected and turned
on. Water supply must deliver at least 4.0GPM at 30psi. Do not draw
from standing water supply. Water temperature must not exceed 104°F
(40°C).