background image

3

6 Amp Reciprocating Saw - Owner's Manual

         GENERAL SAFETY WARNINGS

     WARNING:

 Before using this tool or any of its accessories, read this

     manual and follow all Safety Rules and Operating Instructions. The 

     important precautions, safeguards and instructions appearing in this 

     manual are not meant to cover all possible situations. It must be 

     understood that common sense and caution are factors which cannot be 

     built into the product.

This instruction manual includes the following:

EYE, EAR & LUNG PROTECTION

ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA 

REQUIREMENTS or ANSI SAFETY STANDARD Z87.1

FLYING DEBRIS can cause permanent eye damage. Prescription eyeglasses 

ARE NOT a replacement for proper eye protection.

 WARNING: 

Non-compliant 

eyewear can cause serious injury if broken during the operation of a power tool.

ALWAYS WEAR EAR PROTECTION

WARNING: 

Use hearing protection, particularly during extended periods of 

operation of the tool, or if the operation is noisy.

WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A 

POWER TOOL IN A DUSTY ENVIRONMENT.

WARNING: 

Dust that is created by power sanding, sawing, grinding, drilling, and other 

construction activities may contain chemicals that are known to cause cancer, birth 

defects, or other genetic abnormalities. These chemicals include: Lead from lead-based 

paints; Crystalline silica from bricks, cement, and other masonry products; Arsenic and 

chromium from chemically treated lumber. The level of risk from exposure to these 

chemicals varies, according to how often this type of work is performed. In order to 

reduce exposure to these chemicals, work in a well-ventilated area, and use approved 

safety equipment, such as a dust mask that is specifically designed to filter out 

microscopic particles.

 General Safety Warnings

 Specific Safety Rules

   and Symbols

 Functional Description

 Assembly

 Operation

 Maintenance

 Accessories

Summary of Contents for 1270-080





















Reviews: