RADLEY 1150-000, Owner'S Manual, Page: 12 / 22

11
ASSEMBLY
1. Connect the welding cable and ground cable as shown below: welding cable
connected to anode and ground cable connected to cathode.
2. Instructions for carry strap installation:
step 1
Get the strap through the buckle .
Pull the two ends
through the buckle.
Pull the strap tight
until it becomes locked
by the buckle.
step 2
Install the strap onto the machine.
Put the shoulder pad in the
middle of the strap .
Leave 165 mm on
each end.
step 3 step 4