WiNRADiO G35DDC HF Receiver
66
In this state, the
Current delay
display will show the increasing amount of
saved signal in terms of the time delay, while the
Pause time
display will show
the time when the pausing started. If the paused data length exceeds the
Maximum buffer time,
then
Pause time
will show the oldest buffered data
that remains available for playback.
If there is some data in the pause buffer, the
Resume
button becomes
available. When activated, it will start playback of the saved signal stream,
while the incoming real-time signal will continue to be saved in the buffer.
The
Orig. time
display shows the time when the currently played signal was
originally received. Data that have been already played back are automatically
removed from the buffer to make room for the incoming signal, so that
simultaneous buffering and playback can run for unlimited time, effectively
making it possible to listen to the signal with an adjustable delay.
In pause mode, the
Progress bar
is greyed out and only shows the increasing
amount of data in the buffer. In resume mode, the
Progress bar
becomes
enabled, making it possible for the user to move its slider and so skip a portion
of the buffered data.
The
Skip
button discards the entire buffer contents and terminates the pause
mode. The
Pause
button then becomes enabled again, making it possible to
start another pause session.
During playback of the paused signal, the S-meter, the demodulator spectrum
and all demodulator controls will relate to the currently played back (buffered)
signal. However, the wideband and DDC spectrum displays, and the main
frequency read-out, will all relate to the currently received signal.
Summary of Contents for WR-G35DDC EXCALIBUR ULTRA
Page 100: ...WiNRADiO G35DDC HF Receiver 100 ...
Page 127: ......
Page 128: ...WiNRADiO C O M M U N I C A T I O N S w w w w i n r a d i o c o m ...
