Programme List and Sort Manager
11
Volume Control / Mute Sound
10
• To return to the last channel you were watching, press the LAST button.
• Info Box
This is the box that appears at the bottom of your TV screen and displays information on the current
channel.
It displays information such as the titles of the current and next programmes as well as the quality of
terrestrial reception and signal strength. For more detailed information, select the title of the programme
you want to learn more about and then press the INFO button.
6.4 Volume Control / Mute Sound
Use the VOL UP and VOL DOWN buttons on the remote control to adjust the volume of the TV.
When either button is pressed, the volume indicator appears on the TV screen.
When you have finished adjusting the volume, the volume indicator disappears automatically.
Press the MUTE button on the remote control to disable the sound temporarily.
Press the MUTE button again to restore the sound.
6.5 Listening to the Radio
The Receiver also enables you to listen to radio stations.
To listen to the radio, press the TV/RADIO button on the remote control.
To return to TV viewing, press the TV/RADIO button again.
6.6 Selecting the Audio Mode
This involves setting the audio language and the Audio Mode. The audio language is set to the
language you selected as Main Audio Language in General Settings. That is, you can use this mode to
watch a TV programme in a language other than the language you set as the Main Audio Language. If
you press the AUDIO button again after the Receiver has been turned OFF, you can again watch the TV
programme in the Main Audio Language.
①
Press the AUDIO button on the remote control.
②
To change the audio language, use the CH UP and CH DOWN buttons to select one of the languages
provided by the broadcaster.
③
Use the LEFT / RIGHT buttons to select the Audio Mode you want. Available modes are as follows:
• Stereo: Sound comes from both speakers.
• Mono (L): Sound comes only from the left speaker.
• Mono (R): Sound comes only from the right speaker.
• AC-3: Dolby Digital (To listen to Dolby Digital, connect an amplifier with Dolby Digital decoding to the
SPDIF output.)
④
To return to Viewing Mode, press the AUDIO button again or press the EXIT button.
6.7 Programme List and Sort Manager
Digital TV offers hundreds of channels. Therefore,
all the available channels are managed as a list. In
this section, we will take a look at how to display
the list you want and how to sort such lists. This is
convenient when searching for the list or channel
you want.
To view this list, press the OK button while
watching TV or listening to the radio.
3 coloured buttons are used to manage the
Programme List.
• RED button: Use this to create a user-defined list.
Press the GREEN button on the remote control to switch to the list you created.
• GREEN button:
- Total List : Use to add selected channel to other list.
①
Press the GREEN button to display User lists at the right corner of the window.
②
Select preferred list and press the OK button.
• User List : Use to remove selected channel from the list.
• YELLOW button: Use this to sort or filtering the Programme List.
①
Press YELLOW button to display Sorting window.
②
Set each option of Sorting (Alphabet, Scramble and Locked) and Filter and press the OK button.
6.8 Channel Information
No comma all broadcasters provide channel information. Depending on the broadcaster, channel
information may not always be available. You can use the EPG and INFO buttons to view the channel
information.
6.8.1 EPG (Electronic Programme Guide) Button
Use this button to view information on programme titles, broadcast schedule, programme
synopsis, etc., which are provided by the broadcaster of the current channel.
①
While watching TV, press the EPG button.
②
Select the programme you want to learn
more about. Use the CH UP and CH
DOWN buttons to navigate through
different programmes and use the LEFT /
RIGHT buttons to navigate through the
days of the week.
③
Press the OK button. A synopsis of the
selected programme appears.
If you press the YELLOW button and do not select a Sort option then the
list order will return to the default setting.
Summary of Contents for DT-2000TM
Page 1: ...DT 2000TM ...
