Radionode RN171WC User Manual Download Page 27

Page: 27 / 40

Intr
oduction

Configur

ation

Ins

tallation

Radionode365

Tapacul

o Lit
e

Telnet

Commands

TP R
adionode

ol V1

TP R
adionode

ol V2

Modbus

Regis
tration

About this Manual

Customer Service Information

Manufacturer

Contact

Information

DEKIST Co., Ltd. provides repair service and replacement parts for

RADIONODE products. To request customer service, contact us via

one of the following methods.

●

Tel: +(82) 1566-4359

●

Fax: (+82) 31-8039-4400

●

E-mail: [email protected]

Warranty

Repairs are provided free of charge for product failure under normal

operating conditions within one year of the product installation date.

Limit of

Liability

Warranty repairs are not provided in the event of:

●

Failure caused by unapproved installation methods;

●

Failure caused by user negligence;

●

Failure caused after alteration, disassembly, or repair of the

product by a person unauthorized by DEKIST;

●

Failure caused by corrosion, falling, submersion, or other

improper storage methods;

●

Failure caused by natural disaster or other unforeseen

circumstances, such as storms, floods, earthquakes, lightning, or

abnormal voltage;

●

Service requested for actions that the user can take, such as

replacing consumables;

●

Alteration of the software through decompilation or the like

Cus
tomer Servic

Inf

ormation

Summary of Contents for RN171WC








































Search results

Summary of Contents for RN171WC

Reviews:

Radionode RN171WC, User Manual, Page: 27 / 40

Search results

Summary of Contents for RN171WC

Reviews: