manualshive.com logo in svg

Radionode RN171WC, User Manual, Page: 16 / 40

Share
Download
Radionode RN171WC User Manual Download Page 16

16

Intr
oduction

Configur

ation

Radionode365

Tapacul

o Lit
e

Cus
tomer Servic

e 

Inf

ormation

Telnet 

 

Commands

HT

TP R
adionode 

Pr

ot

oc

ol V1

HT

TP R
adionode 

Pr

ot

oc

ol V2

Modbus 

 

Regis
tration

About this Manual

Display

The display shows measurements and the status of the device.

Channel 1 measurement appears at the top of the display 
and Channel 2 measurement appears at the bottom.

When the device is turned on, the last six digits of the 
assigned IP address will appear. For example, if the IP 

address is 192.168.0.42, it will appear according to the 

left image.

Indicates that no sensor is inserted in the device.

If the 

 appears to be vibrating it indicates that data 

transfer to the server has failed.

This indicates the number of data sets waiting when data 
transfer fails (after 

 appears).

This indicates that re-transfer of a data set was 
successful.

This indicates that the device has failed to connect to the 
Internet.

This indicates that the device is connected to the 
computer via a USB cable.

Ins

tallation

Summary of Contents for RN171WC









































Reviews:

No comments