10
Intr
oduction
Ins
tallation
Radionode365
Tapacul
o Lit
e
Cus
tomer Servic
e
Inf
ormation
Telnet
Commands
HT
TP R
adionode
Pr
ot
oc
ol V1
HT
TP R
adionode
Pr
ot
oc
ol V2
Modbus
Regis
tration
About this Manual
System
Select
2.System Setup
2.System Setup
to change system settings.
A.Set Device Name [DEVICE-xxxx0000xxxx]
A.Set Device Name [DEVICE-xxxx0000xxxx]
Edit the device name. Default name includes the Mac address.
B.Set Destination of HTTP [Radionode365 or
B.Set Destination of HTTP [Radionode365 or
Tapaculo365]
Tapaculo365]
Select
Radionode365 or Tapaculo365
Radionode365 or Tapaculo365
to send measurement
data to Radionode365 server.
When a customer or third-party server is available, select
CUSTOMER
CUSTOMER
to use a GET-method HTTP request or
CUSTOMER_V2
CUSTOMER_V2
to use a POST-method. Then, go to the
4.HTTP Destination
4.HTTP Destination
Setup
Setup
menu and set the server options accordingly. See
Customer Server
on page 12
.
C.Set HTTP Update Interval [300 Sec.]
C.Set HTTP Update Interval [300 Sec.]
Set data transfer interval in minutes. The input value will be
changed to seconds. When using Radionode365, 1 – 60 minute
range is permitted; when using a customer server, 5 – 600 second
range is permitted.
G.Set FND Display Mode [CH1&CH2 ON]
G.Set FND Display Mode [CH1&CH2 ON]
Select whether to show measurements on the display.
H.Set Debug Print [OFF]
H.Set Debug Print [OFF]
This feature is used by service engineers.
Configur
ation