D7212 Installation and Troubleshooting Quick Reference
Page 2
74-06914-000-A 8/93
© 1993 Radionics
Basic Troubleshooting
Command 5 7 Toggles Default Idle Text
Command 5 7 allows technicians who might not be familiar with the custom idle text to confirm
whether an area is armed, ready to arm, or not ready to arm. The default idle text displays are:
AREA # IS ON AREA # IS OFF
Follow the procedure below to toggle between custom and default idle text.
1.
Ensure the command center is at idle text.
2.
Press COMMAND 5 7.
3.
The display will change to default idle text for 5 seconds and then revert to its original
idle text.
Command 5 9 Shows Firmware Revision
Command 5 9 displays the revision of firmware currently installed in the panel.
1.
Ensure the command center is at idle text.
2.
Press COMMAND 5 9.
3.
The current revision of firmware displays (
7212 REV # # - # # ) for 5 seconds and
returns to idle text.