© 2015 Radiodetection Ltd
46
4 Once you have selected the mode you want, press
the
key to confirm
5 Press and hold the
key to select the new setting
and exit the menu
6 Press the
key once to send the settings to the
transmitter
NOTE: Once you have stored the transmitter power
setting in the locator, the locator will change the
transmitter to that setting when you change the
frequency with the locator.
Sleep / wake the transmitter
To help you prolong battery life you can put the
transmitter in standby mode (sleep), and reactivate it
again, using the locator.
To put the transmitter into standby mode, set the TXOUT
menu on the locator to
STDBY
using the “Changing
transmitter power output” procedure described above in
section 13.2
This will disable the transmitter output.
To re-activate the transmitter output, select any power
mode from LOW to BOOST using the same procedure.
If the process fails, you may be out of range or there may
be an error in the connection. Move closer to the
transmitter and retry the procedure. If the connection
continues to fail, return to the transmitter and reset the
connection using the procedure described in Section
12.7
13.3 SideStep
™
If you are using a preferred locate frequency and having
difficulty locating the utility, interference could be
affecting the locate signal. SideStep allows the locator to
change the locate frequency by several Hertz.
This ‘new’ locate frequency can be sent via the Bluetooth
connection to the transmitter and will automatically
change the transmitter frequency to match
the ‘new’
locate frequency.
To step the frequency:
1 On the locator, select the frequency you want by
pressing the
key until the frequency is displayed
on screen
2 To step the frequency, press and hold the
key
until
STEP
appears on the LCD
3 Press the
key to send the SideStep command to
the transmitter
4 If the command is sent successfully, an asterisk (
*
)
will appear on the locator next to the frequency and
STEP will appear on the transmitter below the
frequency
5 Repeat this process to disable SideStep