Radioddity DB25-D, Extended Manual

Page: 86 / 209

Radiod d ity Extended manual for Radiod d ity DB25-D & GD-88 v2.0
© Radiod d ity 2022 page 86 of 209
FM Call Tone / Power On Tone
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose Tone Set and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose FM Call Tone / Power
On Tone and press the [Select]-key to enter.
Press the [Select]-key to turn the PwrOnTone On or Off.
10.9 Appendix
If it is allowed by CPS software you may set and check GPS, FM Radio, Time, DTMF,
Speaker and APRS by accessing the Appendix menu.
GPS
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose Appendix and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose GPS and press the
[Select]-key to choose from the following options and procedures:
(1) GPS Switch
→
press the [Select]-key to turn GPS On or Off;
(2) GPS Serial Data / Upload SW
→
press the [Select]-key
→
rotate the
[ENC] knob or use the [
▲
/
▼
]-keys to choose from one of the options of
GPGGA , GPGSA , GPGSV , GPRMC
→
press the [Select]-key to tick or untick the
option
→
press the [Back]-key to return to the previous level.
Notes : All these options should be checked for APRS to work as expected.
GPGGA: Global Positioning System Fix Data
GPGSA: GPS DOP and active satellites
GPGSV: GPS Satellites in view
GPRMC: Recommended minimum specific GPS/Transit data
(3) GroupInfo
→
press the [Select]-key to enter the following options and
procedures:
•
GPS Map
→
press the [Select]-key to display the rough distance between
the Radiod d ity DB25-D or GD-88 and other stations
→
rotate the [ENC]
knob or use the [
▲
/
▼
]-keys to choose between GroupMap and Location
→
press the [Back]-key to return to the previous level.
• GPS RXMsgs
→
press the [Select]-key to display the list of received APRS
messages
→
rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose the
received message
→
press the [Select]-key to display the full APRS data
(date, time, longitude, latitude, altitude, speed) that had been received
→
press the [Back]-key to return to the previous level.