Radioddity DB25-D Extended Manual Download

Page: 101 / 209

Radiod

ity

Extended manual for Radiod

ity DB25-D & GD-88

v2.0

ity 2022

page 101 of 209

Select the COM-port that does represent your connected programming cable.

Notes:

Only COM-

port 1…8 are currently supported.

Read codeplug from DB25-D or GD-88

To read the current codeplug as stored on the radio,

click on ‘Read’

within the

toolbar to start the transfer of data from the Radiod

ity DB25-D or GD-88 to the

PC.

The radio will display ‘Flash Read’

whilst data is been transferred from the radio to

the CPS.

As soon as all data has been transferred

from the radio to the PC, the text ‘Flash

Read’ will disappear.

Summary of Contents for DB25-D


















































































































































































































Search results

Summary of Contents for DB25-D

Reviews:

Related manuals for DB25-D

Brands by name

Popular brands

Radioddity DB25-D, Extended Manual

Search results

Summary of Contents for DB25-D

Reviews:

Related manuals for DB25-D

Brands by name

Popular brands