Version:
03
Date:
March 16, 2011
Document: Sigma 600 Ver 04
Page 19 of 34
Date 1
e
release: January 1, 2003
The
key switches the pilot to route-dependent mode.
The
key switches the pilot to BAW pilot mode.
The
key provides the pilot with a dodge port command. The dodge function
works in the positions COMPASS and NMEA pilot only.
The
key provides the pilot with a dodge starboard command. The dodge
function works in the positions COMPASS and NMEA pilot only.
3.
Alarm en signaling:
LED above
: When this LED is on continuously the route-dependent
operation has been selected. This LED flickers during a
rudder operation alarm.
LED above
: In conjunction with Sigma 550: When this LED is on
continuously the ROT pilot has been selected.
In conjunction with RZ903: When this LED is on
continuously a linked connection has been selected.
This LED flickers during a course or gyro alarm.
LED above
: When the LED is on the operation has been selected.
When this LED flickers in conjunction with buzzer (short impulses) the
operation has been released and may be taken over.
LED between
and
: When this LED is green the device is on.
When this LED is red there is a voltage alarm.
In the event of an alarm the buzzer will activate at all operations whether they are
selected or not.
4.
Dimming
When the Sigma 600 is connected to a Sigma 550 the Sigma 600 will dim together
with one of the Sigma 550s. There is a choice from two dimming groups and this
may be adjusted via an external potentiometer. When the Sigma 600 is connected
to an RZ903 it may be dimmed via an external potentiometer or dimmed together
with any Sigma 100 present. Another option is to adjust the Sigma 600 in
combination with an RZ903 as permanent background illumination. This requires
adjustment to the RZ903’s software. When a Sigma 600 is used in combination
with an RZ903 only 1 dimming group will be available.
Summary of Contents for Sigma 600
Page 1: ......