21
Storing Numbers Into Memory
Note: For information about storing
numbers from call records into memory
see “Storing Call Records Into Memory”.
Follow these steps to store numbers into
upper or lower memory.
1. Press
STORE
.
LOCATION?
appears.
2. Choose the memory location where
you want to store the number.
• For an upper memory location,
press a memory button.
• For a lower memory location,
press
LOWER,
LOWER
appears on
the display, then press a memory
button.
INPUT
NUMBER:
appears at the top
of the display.
3. Enter the number you want to store,
including any flash and pause en-
tries.
Notes:
• Each flash or pause entry uses
one digit of memory.
• If you make a mistake while en-
tering the number, repeatedly
press
DELETE
until you delete the
incorrect digit. Then re-enter the
correct number.
4. Within 30 seconds after entering the
number, press
STORE
. The system
beeps, then stores the number.
Notes:
• If you do not press
STORE
within
30 seconds, the system returns to
the current time display. To start
over, repeat Steps 1–4.
• If you answer a call before press-
ing
STORE
, you must begin the
procedure again after you com-
plete the call.
• If you have pulse service, press
to store a switch from pulse to
tone mode at the appropriate
place in your number.
Storing Call Records Into
Memory
You can move call records (including
stored numbers) from Caller ID memory
into the phone’s memory locations.
Follow these steps to move Caller ID
records to memory locations:
1. Repeatedly press
REVIEW
8
or
9
to select the Caller ID record
you want to store.
2. Press
STORE
.
LOCATION?
appears
on the display.
3. Within 30 seconds, choose a memo-
ry location where you want to store
the number. The phone sounds a
tone and stores the number.
• For an upper memory location,
press a memory button.
• For a lower memory location,
press
LOWER
and then a memory
button.
43-935.fm Page 21 Friday, January 14, 2000 3:07 PM
