background image

3

Your phone is ETL listed to UL stan-
dards and meets all applicable FCC
standards.

Notes:

• Your system requires two AA batter-

ies (not supplied) to protect its mem-
ory.

• The AC adapter must be connected

with your system to operate proper-
ly. If no AC adapter is connected,
only LINE1 operates.

Important Caller ID Information

To use the phone’s Caller ID and Mes-
sage Waiting features you must be in an
area where those services are available
and you must subscribe to those servic-
es through your local phone company.

Where Caller ID is offered, one or more
options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number.

READ THIS BEFORE 
INSTALLATION

We have designed your telephone to
conform to federal regulations, and you
can connect it to most telephone lines.
However, each device that you connect
to the phone line draws power from the
phone line. We refer to this power draw
as the device’s ringer equivalence num-
ber, or REN. The REN is shown on the
bottom of your phone.

If you are using more than one phone or
other device on the line, add up all the
RENs. If the total is more than five (or
three in rural areas), your phones might
not ring. If ringer operation is impaired,
disconnect one of the devices from the
line.

WARNING:

 To reduce the risk of fire or

shock hazard, do not expose this product to rain
or moisture.

CAUTION

RISK OF ELECTRIC SHOCK. 

DO NOT OPEN.

CAUTION:

 TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.

This symbol is intended to alert
you to the presence of uninsulat-
ed dangerous voltage within the
product’s enclosure that might be
of sufficient magnitude to consti-
tute a risk of electric shock. Do
not open the product’s case.

This symbol is intended to inform
you that important operating and
maintenance instructions are in-
cluded in the literature accompa-
nying this product.

!

!

43-935.fm  Page 3  Friday, January 14, 2000  3:07 PM

Summary of Contents for Two-Line Caller ID Phone With Speakerphone





























Reviews: