39
Note
•
When you try to store more than 150 talkgroup IDs in a bank,
Memory Full!
appears in the scanner’s display. Clear some talkgroup IDs in order to store new
ones (see “Clearing Talkgroup Ids” on Page 86).
Follow these steps to manually store talkgroup IDs or to edit a stored ID.
Notes
Use the following keystrokes to navigate through the ID lists:
•
Press PGM TRUNK to enter the ID list for the current channel storage bank.
•
Press and release the
π
or
θ
keys to scroll through the ID memories one at a time.
•
Press and hold the
π
or
θ
keys to scroll through the ID memories rapidly.
•
Press TRUNK to advance to the next ID sub-bank.
•
Press FUNC
π
or
θ
to advance to the next or previous ID list.
1. Navigate to a channel in the desired trunking bank using MAN or the
π
or
θ
keys
2. Press PGM.
3. Press TRUNK.
4. Select the ID memory you wish to edit using any of the methods described above.
5. Enter the talkgroup ID and press ENTER. If necessary, use the decimal point for a
hyphen.
6. If you want to tag the ID, press TEXT, enter the desired text tag for the ID. Then press
ENTER (see “Text Input Chart” on Page 48).
7. To store the next ID memory in sequence, press
π
and repeat Step 5.
8. Press SCAN to start scanning.