background image

 

9

powerful tool that allows you to quickly reconfigure your scanner for use in different areas 

or applications.   

This scanner gives you direct access to over 59,000 frequencies including those used by 

police and fire departments, ambulance services, government agencies, air, and 

amateur radio services. 

Your scanner includes the following features: 

500 Channels

 – 10 channel storage banks with 50 channels each. 

V-Scanner Folders

 – eleven 500 channel virtual scanner folders at your fingertips. 

Phase 1 APCO-25 Digital Reception

  – automatic detection and reception of digital 

voice modulation from conventional, trunked and mixed-mode networks. 

Intelligent Adaptive Digital Tracking

 – ensures optimal reception of digital signals from 

a variety of digital conventional and trunked radio system types. 

Digital AGC

  – automatically compensates for audio level variances in digital 

transmissions. 

Simultaneous Multi-System  Trunking Operation

 – quickly tracks up to ten Motorola, 

APCO-25 or EDACS trunking systems at the same time. Mix conventional channels and 

trunking systems in the same channel storage banks. Scan conventional frequencies 

and trunked systems simultaneously. Automatically detects Motorola 3600 baud or 

APCO-25 9600 BPS control channel operation. 

Automatic Channel  Tracking

  – automatically determines the  trunking system 

frequencies for Motorola and APCO-25 trunking systems, using only the active system 

control channel. 

CTCSS and DCS Subaudible Encoded Squelch Modes

  –  restricts conventional 

channel reception to transmissions using specified subaudible CTCSS tone or DCS data 

code when  scanning or parked on a single channel. Code Search feature instantly 

displays the tone or code in use. Takes advantage of subaudible squelch tail elimination 

turn off codes when they are present. 

Summary of Contents for PRO-96

























































































































Reviews: