Radio Shack PRO-96 Owner'S Manual Download

Page: 79 / 120

battery condition exists. If you attempt to perform a V-Scanner operation with low

battery power, the scanner will display:

Using the Digital AGC Function

You may find that the audio level varies greatly among different users on digital systems

that you monitor. Many analog conventional and trunked radio systems include

components with automatic gain control to help normalize the audio levels of analog

transmissions in the system. Digital radio systems typically do not include any automatic

gain control functionality and tend to reproduce a user’s voice audio signal more faithfully

with regard to audio levels. This can result in a low level audio signal if a user on the

system is not speaking close enough to their radio microphone.

Your PRO-96 features Digital AGC, which can compensate for these low audio levels

when they occur. By default, Digital AGC is turned on. If desired, you can toggle the

Digital AGC function on or off by pressing FUNC, then MAN at any time. The display will

briefly show

DSP AGC Off

DSP AGC On

accordingly.

Notes

•

Digital AGC has no effect on analog transmissions.

•

You may notice more background noise with Digital AGC on.

Cloning the Programmed Data

You can transfer the contents of the current scanner working memory to and from

another PRO-96 scanner using an optional connecting cable with 1/8-inch (3.5 mm)

phone plugs on both ends (use Radio Shack part number 42-2420 available at your local

RadioShack store), or to a computer application designed to work with this scanner using

a PC interface cable (use Radio Shack part number 20-289, available at your local

RadioShack store).

V-Scanner
Battery Low
Aborted
CL-EXIT

Summary of Contents for PRO-96

























































































































Search results

Summary of Contents for PRO-96

Reviews:

Related manuals for PRO-96

Brands by name

Popular brands

Radio Shack PRO-96, Owner'S Manual

Search results

Summary of Contents for PRO-96

Reviews:

Related manuals for PRO-96

Brands by name

Popular brands