35
Beyond the Basics
Using Signal Stalker
To turn on Signal Stalker, turn
SQUELCH
fully
clockwise, then press
FUNC
+
once except in
WX search, band select, or program mode.
appears. Every 2 seconds, the scanner searches
for frequencies in the range you specified in “Setting
the Signal Stalker Options” on Page 32.
Note:
To continue scanning normally while Signal
Stalker is working, simply press
SCAN
.
When the scanner finds a frequency, it sounds the
alert you specified in “Setting the Signal Stalker
Options” on Page 32, and
Found
flashes. Press any
key to confirm the displayed frequency. Press
SCAN
to resume scanning. Or press
or
while the
frequency and
appear to select the band where
you are searching.
To turn on Signal Stalker and turn off normal
scanning, press
FUNC
+
twice.
and - - - - - -
flash.
To turn off Signal Stalker and turn on normal
scanning, press
FUNC
+
three times.
disappears.
F