![background image](http://html1.mh-extra.com/html/radio-shack/pro-83/pro-83_user-manual_3524772052.webp)
Beyond the Basics
52
Wired Programming
You can transfer programming data to your scanner
using your PC and an optional interface cable (Cat.
No. 20-289, available at your local RadioShack store)
and software (available at your local RadioShack or
www.radioshack.com).
Note:
If the scanner receives no data from the PC
for more than 20 seconds,
T-Err
appears and wired
programming stops.
X
Make sure your scanner is turned off.
Y
Connect the interface cable to your computer
then connect the other end of the cable to
PC/IF
on the side of the scanner.
Z
Install the software to your computer and run the
program.