41
Beyond the Basics
Storing Frequencies Found During
Chain Search into Channel Memory
You can store frequencies you find in chain search
mode or chain search hold mode.
X
Press
FUNC
+
PGM
in chain search mode or
chain search hold mode. The lowest blank
channel and bank appear.
Y
Press
E
to store the frequency into the blank
channel. To select another channel, press
FUNC
+
or
before you press
E
. To enter the
frequency, press
FUNC
.
disappears.
Then
press
E
. You can also press
0
-
9
to select the bank.
If you try to save a frequency that is already stored,
the scanner sounds an error tone and displays the
channel that was duplicated. If you entered the
frequency by mistake, press
./CLR
. To enter the
frequency anyway, press
E
to accept.
The scanner sets itself to program mode after you
store a frequency.
Program Band Select Mode
You can use this mode to define the search range
used during a chain search in each search bank. To
set the scanner to program band select mode, press
FUNC
+
B.SLCT
.
SEARCH
appears. Then select a
search bank.
F