102
103
Detailed Menu Reference
CONV
Parameter
Options
Description
LED Mode
Solid or Flash
Controls whether the Alert LED flashes
or remains on solid when the Alert LED is
used.
LED Color
0-7
Sets LED color to
0-7
as defined in the
GLOB menu. By default,
0
=LED Off,
1
=Red,
2
=Yellow,
3
=Green,
4
=Cyan,
5
=Blue,
6
=Magenta,
7
=White.
Latch LED
On or Off
Normally the Alert LED is active only while
the object is receiving a transmission. When
Latch
is on, the Alert LED will remain lit
after the transmission is complete, unless
overridden by a subsequent object that is
also using the Alert LED.
Backlight
On, Off or Flash
Controls whether the backlight should be
on or flashing while the object is active.
“Off” setting is ignored by the PRO-197.
Alarm
None,
Chirp,
Hi-Lo,
Alert,
Ring, 2-Chirp,
Fast Hi-Lo,
DTMF#
Sets the Audible Alarm for the CONV
object. When an Audible Alarm is selected,
the selected alarm will play at the begin-
ning of each transmission on the CONV
object, or anytime the scanner stops for
activity on the CONV object while scanning.
Fav
Yes or No
When On, the CONV object is a member of
the Favorites Scan List.
Skywarn
Yes or No
When On, the CONV object is a member of
the Skywarn Scan List.
EXPERT BELOW
Modulation
Auto, AM,
FM,
NFM
Modulation setting for the CONV channel.
In most cases
Auto
will work fine. Use
AM
to override and force AM modulation,
FM
to force FM modulation,
NFM
to force
narrow FM modulation.
CONV
Parameter
Options
Description
Atten
On or Off
When on, applies 20 dB of attenuation to
all transmissions on the CONV channel.
Useful in areas where interference from
nearby strong signals is present.
Delay
On or Off
Controls whether a Delay is used to wait
for reply traffic after a transmission on the
CONV channel.
Delay Time
1-250 x 100ms
Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if Delay
is On, e.g., 20=2 seconds.
Digital AGC
On or Off
Controls Digital AGC function for the
CONV channel.
Supertrack
On or Off
Alternative DSP decoding algorithm. May
help reception on some systems.
AudioBoost
On or Off
Applies a 6 dB boost to audio levels when
the object is active.
Hit Count
Numeric value
Increments each time a transmission is
received on the CONV object. Global “Hit
Counts” must be set to ON. Press the
Dflt
softkey to reset to 0.
Summary of Contents for PRO-652
Page 8: ......