Clock Section
Measurement Item Nominal Limit
Minimum Clock
operating voltage on Battery Back-up 7.0V 7.5V
Minimum Alarm
operating voltage on Battery Back-up 7.0V 7.5V
Tape Section
Measurement Item Input/Test Tape Nominal Limit
Output Power at 1 kHz/channel
10% Distortion 8 ohm MTT-112BN 0.5W 0.45W
Maximum 8 ohm MTT-112BN 0.65W 0.6W
Signal to Noise 1000Hz MTT-112BN 47 dB 43 dB
Distortion 1000Hz MTT-118BN 3% 5%
Erase Ratio 1000Hz BLANK TAPE 50 dB 45 dB
Channel Separation 1000Hz MTT-141N 36 dB 32 dB
Hum and Noise Volume Minimum 2.5mV 5mV
Wow & Flutter 3000Hz MTT-111N 0.2% 0.40%
Note: Nominal specs represent the design specs. All units should be able
to approximate these- some will exceed and some might drop slightly
below these specs. Limit specs represent the absolute worst
condition that still might be considered acceptable: in no case
should a unit fail to meet limit specs.
*European models must not be able to tune below 87.5 MHz.
(br/all-12/27/94)
LN-03/04
