Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Dual Caller..., Owner'S Manual

Page: 19 / 28

19
Operation
Storing a Number in the Base
Follow these steps to store numbers in the
base:
1. Hold down
MEMORY
until
Ijeh[
Ijeh[ Ijeh[
Ijeh[ DkcX[h
DkcX[h DkcX[h
DkcX[h
appears on the base's display.
2. Enter the phone number and any tone or
pause entries (see “Entering a Pause”).
If you make a mistake, press
MEMORY
to exit the memory store operation. Start
again at Step 1.
3. Press
MEMORY
again.
I[b[Yj
I[b[Yj I[b[Yj
I[b[Yj BeYWj_ed
BeYWj_ed BeYWj_ed
BeYWj_ed
appears. Enter the memory location
number (
0
–
9
) where you want to store
the number. The phone beeps and
C[cehod
C[cehod C[cehod
C[cehod IIIIjeh[Z
jeh[Z jeh[Z
jeh[Z
appears.
To clear a stored number, simply store a new
number in its place. Or, hold down
MEMORY
until
Ijeh[
Ijeh[ Ijeh[
Ijeh[ DkcX[h
DkcX[h DkcX[h
DkcX[h
appears. Then press
MEM-
ORY
and the memory location number (
0
–
9
)
you want to clear. The phone beeps and
C[cehodd C[cehodd C[cehodd C[cehodd :[b[j[Z :[b[j[Z :[b[j[Z :[b[j[Z
appears.
Use the supplied memory directory sticker to
record your stored numbers. Peel the back-
ing from the sticker and attach it to the base.
Editing or Deleting a Number in
the Handset's Memory
Follow these steps to edit or delete a memo-
ry number.
1. Lift the handset.
2. Hold down
MEM
until
C[ceho
C[ceho C[ceho
C[ceho Ijeh[
Ijeh[ Ijeh[
Ijeh[
and a
list of memory location numbers appear.
3. Choose a memory location (
01
–
20
) by
pressing a number or by repeatedly
pressing
VOL/CID
8
8 8
8
or
9
9 9
9
.
4. Press
SELECT/INTCM
. A menu appears
with the three options listed below.
Press
VOL/CID
8
8 8
8
or
9
9 9
9
to highlight the
desired option then press
SELECT/
INTCM
to choose it.
Menu Options:
•
;Z_jý C[cehodd ;Z_jý C[cehodd ;Z_jý C[cehodd ;Z_jý C[cehodd
— edit the record as
described in Steps 5 through 8 of “Stor-
ing a Name and Number in the Hand-
set’s Memory” on Page 17.
•
:[b[j[ýC[cehodd
:[b[j[ýC[cehodd :[b[j[ýC[cehodd
:[b[j[ýC[cehodd
— the display prompts
you to confirm the deletion. Move the
cursor to
O[i
O[i O[i
O[i
, then press
SELECT/INTCM
or
DELETE/CH
. The phone beeps, and
C[cehodd
C[cehodd C[cehodd
C[cehodd :[b[j[Z
:[b[j[Z :[b[j[Z
:[b[j[Z
appears.
•
=eý8WYa
=eý8WYa =eý8WYa
=eý8WYa
— returns you to the list of mem-
ory numbers.
Entering a Pause
In some telephone systems, you must dial an
access code (9, for example) and wait for a
second dial tone before you can dial an out-
side number. You can store the access code
with the phone number. However, you
should also store a pause after the access
code to allow the outside line time to con-
nect.
To enter a 2-second pause, press
REDIAL/
PAUSE
(
PAUSE
on the handset).
FFFF
appears
when you enter a pause in the memory. You
can add more pause entries for a longer
pause.