9
Note: To mount the TAD directly on a
wall, you need two screws (not supplied)
with heads that fit into the keyhole slots
on the bottom of the bracket.
Follow the steps under “On a Wall Plate
or Wall” on Page 8, then apply these ad-
ditional instructions for placement on a
wall.
1. Drill two holes 3
15
/
16
inches (100 mm)
apart. Then thread a
screw into each hole,
letting the heads
extend about
5
/
16
inch (8 mm) from the
wall.
2. Plug one end of the supplied long
modular cord into the
TEL
LINE
jack
at the back of the base.
3. Align the bracket’s keyhole slots
with the mounting screws and slide
the base downward to secure it.
CONNECTING AND
CHARGING THE BATTERY
PACK
The TAD-734 comes with a recharge-
able nickel-cadmium battery pack in-
stalled in the handset, but not
connected. Before using your phone,
you must connect the battery pack, then
charge it for about 24 hours.
1. Press down and slide off the battery
pack compartment cover.
2. Lift the battery pack out of the com-
partment. Plug the battery pack’s
connector into the socket in the
compartment. The connector fits
only one way.
3. Place the battery pack in the com-
partment.
4. Replace the cover.
3
15
/
16
5
/
16
43-734.fm Page 9 Thursday, February 24, 2000 10:42 AM