Radio Shack 43-3872 Page 67 User Manual Download

Page: 67 / 76

The Int

egrated Answering

Device

Voice memo

The voice memo function allows the user to

record messages (more than two seconds

and less than four minutes).

1. In standby mode, press the

RECORD

soft key on the base.

2. Press the

START

soft key. You will hear

the announcement "Record Memo
Message" and a confirmation tone.

3. Start your recording.

4. When you have finished, press the

STOP

soft key to stop recording. The

system returns to standby.

Recording a conversation

You can record a conversation from the

handset or the base (more than two

seconds and within ten minutes).

From the base

1. During a conversation, press

the

MENU

soft key on the base.

Press

to select

Call Record

and then press the

soft key.

Recording a Call

and

appears

on the base. A confirmation tone, that
can be heard by both parties, sounds
during recording.

To stop recording, press the

MENU

soft

key and

to select

Call Record

and then press the

soft key. You will

hear a confirmation tone.

NOTES

Voice Memo

• The voice memo

messages are recorded
as an incoming
messages.

• When the answering

system is full,

appears on the display,
and recording is
terminated.

Recording a
Conversation

• While a conferecing, you

can not record the
conversation.

(7..

43-3880.book Page 67 Monday, June 28, 2004 2:07 PM

Summary of Contents for 43-3872













































































Search results

Summary of Contents for 43-3872

Reviews:

Related manuals for 43-3872

Brands by name

Popular brands

Radio Shack 43-3872, User Manual

Search results

Summary of Contents for 43-3872

Reviews:

Related manuals for 43-3872

Brands by name

Popular brands