Radio Shack 43-3872 Page 30 User Manual Download

Page: 30 / 76

Using Your Phone

From the base

Press

SPEAKER

or pick up the corded

handset.

ANGING

From the handset or handset

speakerphone, press

END

or return the

handset to the cradle (AutoStandby).
From the base, press

SPEAKER

or return

the corded handset to the base.

WITCHING

PEAKERPHONE

URING

ALL

To switch a normal call to the

speakerphone, press

SPEAKER

on the

handset. To switch from a speakerphone

call to a normall call, press

SPEAKER

again.

ALL

AITING

If you have Call Waiting service and a call

waiting tone sounds while you are on a call,

press

TALK/FLASH

on the handset or

the

FLASH

soft key on the base to accept

the waiting call. There is a short pause, and

then you will hear the new caller. To return

to the original caller, press

TALK/FLASH

the handset or the

FLASH

soft key on the

base again.

NOTES

• You must subscribe

through your local
telephone company to
receive Call Waiting or
Caller ID on call waiting
service.

• You can place a call on

hold for five minutes.
When five minutes has
passed, the call is
disconnected, and the
phone returns to standby
mode.

• While a call is on hold,

CIDCW can not be
received.

43-3880.book Page 30 Monday, June 28, 2004 2:07 PM

Summary of Contents for 43-3872













































































Search results

Summary of Contents for 43-3872

Reviews:

Related manuals for 43-3872

Brands by name

Popular brands

Radio Shack 43-3872, User Manual

Search results

Summary of Contents for 43-3872

Reviews:

Related manuals for 43-3872

Brands by name

Popular brands