Radio Shack 43-3703 Owner'S Manual Download Page 17

Page: 17 / 56

g Me

nu O

SETTING MENU

OPTIONS

SING

THE

NTERFACE

Below are some tips for using the software

interface on your phone.

• Press the

MENU

soft key to access the

main menu.

• Use

CID/VOL/

REDIAL/P/

to scroll

through options.

• Press the

soft key to make a

selection.

• Press the

BACK

soft key to return to the

previous screen.

• Press

END

to exit the menu.

• If you do not press a key within 30

seconds, the phone will time out and
exit the menu mode. When setting Day

and Time, the time-out period is
extended to two minutes.

DirectLink Mode

In DirectLink® mode, a pair of handsets can

function as two-way radios. DirectLink Mode
allows two handsets to communicate with
each other without the base unit or a

telephone line. Use them at sporting events
or while shopping to stay in contact with
family members or friends. You must set

both handsets to DirectLink Mode to
activate this feature.

Using DirectLink Mode

1. Press the

MENU

soft key and select the

DirectLink Mode menu.

To enter

DirectLink mode press
[ENTER]

appears.

2. Press the

ENTER

soft key to enter

DirectLink mode. You will hear a

NOTE

You must have two
handsets to use Direct Link
Mode.

43-3703.book Page 17 Thursday, July 15, 2004 11:37 AM

Summary of Contents for 43-3703

























































Search results

Summary of Contents for 43-3703

Reviews:

Related manuals for 43-3703

Brands by name

Popular brands

Radio Shack 43-3703, Owner'S Manual

Search results

Summary of Contents for 43-3703

Reviews:

Related manuals for 43-3703

Brands by name

Popular brands