46
47
To activate SAME standby mode:
1.
Press
WX
. The scanner quickly locates an active
weather radio frequency.
2.
When the scanner stops on a frequency, press
the
stby
softkey. The softkey will change
to
STBY
, and the scanner will alert when a
matching SAME message is received.
3.
To exit SAME Standby Mode, press the
STBY
softkey again, or press
MAN
,
SCAN
or
PGM
.
Your scanner will resume SAME Standby operation
90 seconds after the SAME warning starts. You may
reset standby mode by pressing the STBY softkey
twice at any time.
Configuring
Your PRO-651 scanner includes Global Settings that
store radio-wide settings.
Caution:
The Special Global Settings menu (
PGM
+
GLOB
) includes parameter settings that, if not set
properly, may adversely affect the performance of
your radio. We recommend caution when changing
these settings.
NOTE:
Each parameter includes a
Dflt
softkey that
restores the factory default setting.
Context sensitive help is available for all parameters.
Press
FUNC
and then
SEL
to view help. Press
SEL
again to exit help.
GLOB Menu Reference
Contrast
– Sets LCD contrast.
Owner
– Sets Welcome Message text display.
Clone Send
– Press
SEL
to send data to clone.
Alert Mode
– Tone, Light, Both, or Off.
Sound Mode
– On or Stlth (Silent).
Key Beeps
– On or Off.
Light Mode
– Norml, Key, Ignre, On, or Stlth.
Light Area
– LCD, Keybd, or Both
Light Secs
– Backlight duration in seconds (1-99).
Battery
– Ni-MH, Alkaline or Ni-Cd.
Lo Batt Alert
– Audible battery alert. (0-60
seconds. 0=off.)
Battery Info
– Displays battery voltage, DAC value
and remaining charge time.
Charge Time
– Battery charge time in hours (0-99
0=off).
