Radio Shack 2000651, User Manual

Page: 20 / 37

38 39
Limit Search Object (LMIT)
Because a LMIT object is assigned to a scan list, it
can be used to search while the radio is scanning. It
can also be used as a stand-alone search.
To create a new LMIT object:
1.
Press
PGM
.
2.
Press the
NEW
softkey.
3.
Press the
SRCH
softkey.
4.
Press the
LMIT
softkey.
5.
Configure settings for the object. To restore
the default setting, press the
Dflt
softkey. Enter
the beginning ( FrLo) frequency then enter the
ending (FrHi) frequency.
6.
Name your search in the
Tag
field.
7.
To search while scanning, assign the object to a
scan list.
8.
Press the
Save
softkey.
To begin a Limit search:
1.
Press
MAN
.
2.
Use the 4-direction keypad to navigate to the
LMIT object.
3.
Press the
SRCH
softkey (not
SRCH
on the
keypad).
4.
Press
PSE
to hold on a transmission. To resume,
press
PSE
again.
• Press the
FrL/O
softkey lock out a frequency.
• Press the
STOR
softkey to create a new CONV
object using the found frequency.
Change
Setting
Scroll
LMIT Menu Reference
Scan Lists
– Press
SEL
to assign the object to
scan lists. An asterisk (*) indicates an assigned
scan list.
FrLo – Lowest frequency in the range.
FrHi
– Highest frequency in the range.
Tag – The display name for the object.
L/Out
– Permanent lockout status for the object.
LED Mode
– Solid or Flash.
LED Color – 0=Off, 1=Red, 2=Yellow, 3=Green,
4=Cyan, 5=Blue, 6=Magenta, 7=White.
Latch LED
– Off, the Alert LED is on only during a
transmission; On, the Alert LED remains lit after a
transmission, unless overridden.
Backlight – On, Off, or Flash.
Alarm
– None, Chirp, Hi-Lo, Alert, Ring, 2-Chirp,
Fast Hi-Lo, DTMF#.
Fav – Assigns the object to the Favorites scan list.
Modulation – Automatic, AM, FM, or NFM
Atten
– Attenuation. On or Off.
Delay – On or off.
Delay Time
– (1-250) Delay time in 100 ms.
Zeromatic – On or off.
Search Dir
– Up or Down.
Hit Count
– Number of received transmissions for
the object. Global Hit Counts must be set to on.
Press the
Dflt
softkey to reset to 0.