55
Beyond the Basics
depending upon the trunk system
selected.
Notes:
•
If you enter an invalid frequency
(outside the selected range),
the scanner beeps, the channel
number fl ashes and Error appears.
If this happens, press •/CLR /
DELAY to clear the frequency, then
repeat the entry.
•
For EDACS (Ed) and LTR systems,
you must enter the frequencies
in logical channel number (LCN)
order.
•
If you try to enter a duplicate
frequency in a bank, the scanner
beeps and the channel which was
previously stored appears
5. Press
S
or
T
to select the next
channel in the bank and repeat Step 4
to enter frequencies in that bank.
6. Repeatedly press
•/CLR /DELAY
to
return back to Step 2. Repeat Steps 2
and 5 until all frequencies have been
entered.
7. Press
SRCH
to begin searching for
the trunk’s data channel and scan
conventional frequencies at the same
Notes
Summary of Contents for 20-528
Page 90: ...90 Beyond the Basics ...
Page 91: ...91 Beyond the Basics ...
