Radio Shack 20-528 User Manual Download

Page: 22 / 92

Beyond the Basics

• If you entered a frequency in

Step 4, which already exists on

another channel, the scanner beeps

an error tone and displays that

channel. Press

•/CLR /DELAY

clear the display, or press

E/PGM

to store the frequency in both

channels.

• The scanner automatically rounds

the entered number to the nearest

valid frequency. For example, if you

enter 151.473 (MHz), your scanner

accepts it as 151.475.

• After a transmission, the scanner

automatically pauses for 2 seconds

on this channel before proceeding

to the next active transmission.

Press

•/CLR /DELAY

to turn the

delay function off or on. See

“delay”). The scanner stores this

setting in the channel.

6. To program the next channel in

sequence, press

and repeat

Steps 4 and 5.

copying/moving a frequency

If you want to copy/move a frequency to a
channel, follow the steps below:

1. Manually select the channel which

contains the frequency you want to
copy or move.

Summary of Contents for 20-528





























































































Search results

Summary of Contents for 20-528

Reviews:

Related manuals for 20-528

Brands by name

Popular brands

Radio Shack 20-528, User Manual

Search results

Summary of Contents for 20-528

Reviews:

Related manuals for 20-528

Brands by name

Popular brands