manualshive.com logo in svg

Radio Shack 20-528, User Manual

Share
Download
Radio Shack 20-528 User Manual Download Page 45

45

Beyond the Basics

6.  To set to alert only for the area you 

have programmed, press 

S

 or 

T

 to 

move 

F1

 to 

F15

, then press 

E/PGM

. 

Then go to 

WX

 hold.

Skywarn

The Skywarn function lets you jump 
directly to the last channel in memory 
(Channel 1000) from any mode by press 
and holding 

WX/

. The scanner goes 

into scan hold mode and starts receiving 
transmissions in the last channel. Before 
using this feature, enter the local Skywarn 
frequency for your area into Channel 1000.
If no frequency is programmed in the last 
channel, 

No Prog

 appears and the scanner 

sounds an error tone.

about Skywarn

Skywarn is an organized group of trained 
weather observers. A Skywarn group 
exists in virtually every US county with a 
signi

fi

 cant population. During inclement 

weather, reports made by Skywarn 
observers include information about:

• Pea-sized and larger hail

• Wind and wind gusts of 40 MPH and 

greater

• Heavy rainfall

Summary of Contents for 20-528





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands