manualshive.com logo in svg

Radio Shack 20-528, User Manual

Share
Download
Radio Shack 20-528 User Manual Download Page 51

51

Beyond the Basics

5.   When you select the option, press 

•/

CLR /DELAY

 to exit the option mode.

6. Press 

MENU

 to exit the menu mode.

using Signal Stalker I

Note: Turn off the data skip feature if 
it is on.

To turn on Signal Stalker I, turn 

SQUELCH

 

fully clockwise, then press 

 except 

in WX search, program search range, 
or program mode.  

 appears. Every 

2 seconds, the scanner searches for 
frequencies in the range you speci

fi

 ed in 

“Setting the Signal Stalker I Options.”
When the scanner 

fi

 nds a frequency, it 

sounds the alert you speci

fi

 ed in  “Setting 

the Signal Stalker I Options”, and 

Found

 

fl

 ashes. Press any key to con

fi

 rm the 

displayed frequency. Press 

HOLD/RESUME

 

to resume scanning.
To turn on Signal Stalker I and turn off 
normal scanning, turn S-S.OnlY of Signal 
Stalker I options to on. 

 

fl

 ashes. See 

“setting the Signal Stalker I options.” 
To turn off Signal Stalker I and turn on 
normal scanning, press  

 and 

disappears.

trunking operation

The scanner tracks transmissions that use 
the Motorola Type I, Type II, hybrid, and 
EDACS and LTR analog trunking systems.

Notes

Summary of Contents for 20-528





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands