98
SPECTRALIS
[Stop]
The
[Stop]
-button stops the song at the current songstep. If you restart the song
by pressing
[Play]
, the song will automaticly start at the beginning of the current
songstep. If you press
[Stop]
twice or if you press
[Stop]
when the songs was
already stopped, the sonstep-number will be resetted to songstep 1.
[Play]
Always starts the song at the current songstep.
3.10.2 Jumping into pattern-jam mode
As mentioned above - you can leave the current song-chain without stopping the
sequencer. Just press the
[Pattern]
-button in the num-button assignment section
and start jamming. If you want to jump back into your song-chain, press
[Song]
again and press
[Page-Up]
one time, to play back the rest of the songsteps of your
song-chain.This handlling is very robust. You can for example jump into the pattern-
mode, select another pattern, edit some drum-groove steps on the fly, save the pattern
and still are allowed to jump back into the song-chain, that already will play then
your edited patterns in case they they are in use inside the songchain.
3.10.3 Editing a song chain
Editing a song-chain is very easy and can also be done on the fly without stopping the
sequencer. Select
[Song]
inside the num-button assignment section to get the following
display message:
S04:Ambient PA09:Filters3 Pa:15 S 6
[Edit] <UNDO> [RENAME] <MIDI>
Please press the
[Edit]
-encoder button to open the songchain editor page:
1/2 Ambient Step: 8 of 8
Filters8 Ofst:0/4 Repeat: 1Trnc:0/4
The display always shows the information about the current songstep. The songstep
plays in cycle mode while editing.
Selecting the pattern for the current songstep
Select the pattern for the current songstep by pressing a num-button or a
[shift]
+num-button combination. All patterns of your songchain should already
be placed inside the songfolder of the selected song.
Setting the Mutings of the current songstep
Press and hold the
[Mute]
-button and press the num-button of the part, you
want to mute or unmute. The current setting will become visible at the num-buttons
LED's.
Setting the transpose settings for the current songstep
Press and hold the
[Transpose]
-button and select the desired transpose setting
"How to...?" Editing a song-chain
Summary of Contents for Spectralis
Page 1: ...1 SPECTRALIS Spectralis...
