Radical Sportscars SR3 XX, Owner'S Manual, Page: 8 / 56

8 QD163-1
1.5 REAR SUSPENSION LAYOUT
1.6 ELECTRICAL HARDWARE LOCATION
On the right-hand side of the SR3 cockpit you will find an access panel, behind this are the following items:
o ECU
o Barometric pressure sensor
To remove the ECU, undo the 4 bolts holding the plate on, then the two bolts in the bracket for the ECU.
Then
pull the silver clip upwards to an upright position. The connecting hairbrush can then be rotated off the ECU.
To refit repeat these steps in reverse. This should not be removed unless there is an issue or the engine is
being returned for rebuild.
Rocker
Top Wishbone
Pushrod
Upright
Lower Wishbone
Roll Bar
Driveshaft
Spring/Damper