22
INSTALLING LINER
TIP:
To help in removing stubborn wrinkles, a
shop vacuum may be used to suck the air out
from behind the liner. Attach shop vac to skimmer
outlet and seal with duct tape. Seal all other open-
ings with duct tape as well. Turn on vac and run till
wrinkles are removed. Once the wrinkles are gone,
begin filling with water. After 6” of water is in the
pool, turn off and remove the shop vac.
Clear all sticks and sharp objects from an area near the
pool that is as large as the pool itself. Remove the liner
from its carton and unfold and open the liner. Refold
the liner so that it can easily be carried to the pool and
unfold from the outside of the pool. Check to make sure
the sand in the pool is level and that there are no sharp
objects in the pool.
Place the liner into the pool while holding onto the top
of the wall section of the liner. Snap the bead of the liner
into the bead receiver track around the entire pool.
(
Be sure to insert liner bead in bottom track of
Premium 4” coping as shown at right
)
Gently pull on the liner and use a soft bristle broom to
remove as many wrinkles as possible on the bottom of
the pool. Start filling the pool slowly with water. Continue
pulling gently and working the liner with a broom as
needed. Some wrinkling of the liner may be evident and
in no way affects the structural strength of your pool.
You can continue to work out the wrinkles as needed by
pulling gently on the liner or by using a broom.
Premium
4” Coping
Standard
2” Coping
Liner Bead
Bead Track
Liner Bead
Bottom
Bead Track
FILLING YOUR POOL
Whether you are filling the pool with your own home water source
or through a water-fill service, please use the chart at right to
determine the water volume requirements for your particular size
pool.
Please see your pool professional for instructions on proper water
testing and balancing.
Water Gallonage per Size
Pool
Size
52” Pool Wall
(44” of water)
12' x 16'
4,419
12' x 20'
5,735
12' x24'
7,052
16' x 24'
9,028
16' x 28'
10,781
16' x 32'
12,537
18' x 34'
14,874