40
Wi-Fi module management:
The Wi-Fi module can be switched on, turned off or reported in access point mode according to your needs.
To switch off the Wi-Fi module, press the
"F" key until the word WiFi appears on
the display.
Press the "-" key to turn off the module.
Turning off the
icon confirms the
correct execution of the command.
To switch on the Wi-Fi module, press the
"F" key until the word WiFi appears on
the display.
Press the "+" key to turn on the module.
Turning on the
icon confirms the
correct execution of the command.
To bring the Wi-Fi module back into
Access Point mode and ready to connect
to a Wi-Fi network, press the "F" key until
the word WiFi appears on the display.
Press the "+" key for 3" to reset the
module.
The display of the word "AP" confirms the
restoration of the Access Point mode.
Wi-Fi module status is shown on the display by a small icon on the right side.
Wi-Fi ON and CONNECTED TO A VALID NETWORK
symbol light steady
Wi-Fi ON but NOT CONNECTED TO A NETWORK or
CONNECTED TO A NETWORK WITHOUT INTERNET
symbol flashing
(
(
(
(
Wi-Fi ON and ready for the initial configuration
symbol flashing
(
(
(
(
Wi-Fi OFF
symbol not visible
Note:
After switching on the product, the connection to the Wi-Fi network and the App requires a 30" waiting
time at least. If the operation is not successful, the Wi-Fi symbol flashes and the App shows the product as
disconnected. In this case it is necessary to switch off the radiator for at least 30 seconds before trying again.
See paragraph 7 for troubleshooting of the most common problems and the explanation of the error
codes.
Summary of Contents for KLIMA 7 AS
Page 3: ...3 6 8 7 click 5 click A B...
Page 4: ...4 9 3m 1m 4m 3m...
Page 127: ...127...
Page 128: ...ISKLI002_R4...
