32
“OK will appear on the display for 5
second, confirming that the Program
sequence
has
been
carried
out
successfully.
System is now set to adjust the
temperature according to the new
adjustment of program P1.
Note:
it is possible to exit any time from
the
program
sequence,
without
displaying every hour until Day 7.
To do so, just hold “F” button and press “-
“ button.
N.B.:
-
You can abort the display/modification sequence anytime, deleting any settings that have not been saved, just by
pressing “Stand-By” button;
-
Restoring the default settings will delete every P1 Program previously created (see paragraph 6.3);
-
If no button is pressed within 90 sec. during the Program setting process, the result will be the cancellation of the
display/modification procedure and will restore back the factory default settings;
-
During the programming process, the heating elements will automatically switch to Stand-by mode, and the radiator
does not heat.
EXAMPLE: HOW TO SET A CUSTOM PROGRAM
Let’s see how to program a brand-new radiator, and anticipate the change from ECO to COMFORT temperature one hour
earlier (06:00 a.m. is the default factory settings), for each day from Monday to Friday.
Press “M” to select Program P1
Set the current day of the week (first use
of the radiator) using
“+” or “-“ button.
Press “M” and set the current Hour (first
use of the radiator) using “+” or “-“ button.
Press “M” and set the current Minutes
(first use of the radiator) using “+” or “-“
button.
Press “M” to end the time setting
procedure. System now gets back to
Program P1.
Summary of Contents for KLIMA 7 AS
Page 3: ...3 6 8 7 click 5 click A B...
Page 4: ...4 9 3m 1m 4m 3m...
Page 127: ...127...
Page 128: ...ISKLI002_R4...
