16
Plug the heater into a power outlet
to turn it on. If the product is new
or has not been powered for more
than 5 minutes, the display shows a
flashing time symbol.
Use the "+" and "-" buttons to set the
desired time.
Press the "SELECT" button to con
-
firm the desired time.
The minutes symbol starts blinking.
Use the "+" and "-" buttons to set the
desired minutes.
Press the "SELECT" button to con
-
firm the desired minutes.
The display shows the set time.
The product is in standby mode.
To adjust the time, just press the "+" and "-" keys together for 5 sec. Time digits will start blinking and the adjustment
procedure can be performed as described above.
+
POWER ON
Press the "STAND-BY" button to turn
on the heater in cold air mode.
The cold air mode symbol lights up
in the display.
The led under the STAND-BY key
lights up.
