5
Owner’s Manual:
5925
1785436 Rev U
ECO 18-0034
July 2018
www.radiaproducts.com (PHONE) 800-221-1083 | (INTL) +1-763-533-2969 | (FAX) 763-533-0015
Keep the work area free of clutter and
electrical cords.
Avoid extension cords. To minimize the risk
of improper electrical grounding, extension
cords are not recommended. If an extension
cord is unavoidable, consult a qualified
electrician to determine what type of
extension cord will satisfy the grounding,
current capacity, and other requirements of
the particular situation.
Use the proper power source. Refer to the
machine data plate on the right side panel or
the section 2.1, Specifications, in this manual.
Keep customers away from the work area.
The machine should be used only by properly
trained individuals.
Clamp the can carefully to ensure that it is
held securely during the mixing cycle.
1.2 Safety Precaution Summary
Safety Information, Continued..
WARNING!
DO NOT
attempt to replace any damaged
electrical wire or components. Improper
replacement could result in electric
shock and serious injury. Only a qualified
service representative should attempt to
repair or replace any damaged electrical
components.
Review this owner's manual before
installing or operating.
The machine must be properly grounded
prior to use. In the case of an electrical
short circuit, grounding reduces the risk of
electric shock by providing an escape wire
for the electric current.
The machine’s power cord has a
grounding wire with an appropriate
grounding plug. This plug must be inserted
into an electrical outlet that is properly
installed and grounded according to all
local codes and ordinances
.
If you must repair or replace the power
cord or plug, do not connect the
grounding wire to either flat-blade
terminal. The wire with insulation having an
outer surface that is green (with or without
yellow stripes) is the grounding wire.
Check with a qualified electrician if
you don’t completely understand these
grounding instructions, or if you are not
sure whether the machine is properly
grounded.
DO NOT
modify the plug
provided; if it won’t fit in the outlet, have
a proper outlet installed by a qualified
electrician.
Disconnect the power cord before
servicing, cleaning, or removing any
covers
Follow the lockout/tagout procedures of
your company.
DO NOT
open the door until the machine
comes to a complete stop.
To avoid electric shock, don’t get the
timer, control panel, or wiring wet.
This machine is not explosion proof rated.
All containers must be properly sealed and
void of leaks.
Review product label, Material Safety Data
Sheet, and HMIS rating of materials prior to
mixing to determine potential hazards.
DO NOT use solvent-based cleaners or thinners.
Use in a dry and well-ventilated environment
where dust and flammable vapors are not
present.
Product safety labels should be inspected and
cleaned periodically to maintain good legibility.
Replace any labels that are no longer legible.
“ WARNING: This product may expose you to
chemicals including DEHP, which is known to
the State of California to cause cancer. For more
information, go to www.P65Warnings.ca.gov
CAUTION!