9
Owner’s Manual:
5925
1785436 Rev U
ECO 18-0034
July 2018
www.radiaproducts.com (PHONE) 800-221-1083 | (INTL) +1-763-533-2969 | (FAX) 763-533-0015
WARNING!
Avoid serious personal injury. Do
not mix flammable or combustible materials in this
mixer.
1. Open the cabinet door.
2. Pull the ratchet release lever
(A)
toward you
until it clicks. Turn the handle
(B)
on the top of the
clamp counterclockwise to raise the clamping
(top) plate
(C)
.
3. Slide the pail onto the bottom plate
(D)
.
4. Position the pail in the grooves on the bottom
plate. The grooves on the plate keep the pail in
place during mixing.
5. Lower the clamping plate by turning the
handle
(B)
clockwise. Once the plate makes
contact with the pail, tighten another 1/8 turn.
6. Secure the bail with the bail spring.
7. Close the door and select the desired cycle
length on the Timer.
(D)
(C)
WARNING!
Avoid serious personal injury.
Do not open the door until the machine
comes to a complete stop; moving parts
inside could cause serious injury.
1. Raise the clamp all the way to the top by
(1)
pulling ing the ratchet release lever
(A)
torward you until it clicks and
(2)
turning the
crank handle counter-clockwise.
2. Unfasten the bail spring.
3. Pull pail forward onto roller to remove from
machine.
Notice: Avoid damage to the machine.
• A safety interlock interrupts machine
operation if the door is open.
• If the bail spring wasn’t properly secured,
press the
EMERGENCY STOP
button on the
control panel.
• Do not operate the machine without a
can installed.
(A)
(B)
4.2 Install a Pail and Mix
4.3 Remove a Pail