background image

6

Owner’s Manual: 

5315-X1

1784242  Rev F

ECO  18-0034

July  2018

www.radiaproducts.com  (PHONE) 800-221-1083 | (INTL) +1-763-533-2969 | (FAX) 763-533-0015

 

Congratulations on your purchase of the Speed 

Demon 5

TM

 Vortex Mixer. This machine is designed 

to accommodate single round 5 gallon plastic 

or metal containers weighing up to 80 lb. (36.3 

kg). It can also accommodate round and square  

gallon cans when used in conjunction with the 

optional adapter, part no. A1510. See section 9, 

Ordering, for ordering instructions.
Understand your machine's features and 

proper operation to take full advantage of its 

capabilities.
Read this entire manual completely before 

operating the machine. Practice installing and 

removing a pail before mixing for the first time. 
Keep this manual for future reference.

Always follow all safety instructions!

Unit Size, 5315-X1

 

: W 

29.5 in. (75 cm) 

D

 

29.3 in. 

(73.7cm) 

H

 

36 in. (91.5 cm)

Machine Weight
5315PB:

 

267 lb. (121 kg)

Maximum Capacity:

 

80 lb. (36.3 kg)

Sizes Mixed:

 

Five gal., One gal. with adapter

Electric Service: 

110 V 60 Hz

110 V Units

Machines rated at 110 V, 60 Hz are for use with a 

nominal 120 V circuit.

 29 1/4" 

 29 1/2" 

 36" 

2. Introduction

2.1 Application

2.2 Specifications

Summary of Contents for 0-5315-X1





















Reviews: