55
EN
9.3 Clearing the DuoFern network
This function enables you to log off all DuoFern devices from the
DuoFern Wall Controller that are no longer accessible via radio.
i
Not all battery-operated DuoFern devices can be
logged off in this way.
A software reset must be carried out in order to log
off and delete all DuoFern devices, see page 61.
1.
5 sec. Activate the clearing function.
Simultaneously press and hold buttons
TL + T1
for 5 seconds.
During the clearing function:
◆
The green LED flashes first,
◆
then the green LED lights up continu-
ously and the red LED flashes until the
clearing function is completed.
2.
If the clearing function has been successfully completed, the
green LED then lights up for approx. 2 seconds.
Cancelling the clearing function
You can cancel the clearing function at any time by briefly
pressing any random button.
i
