53
EN
Logging on multi-channel actuators:
1.
Switch the desired DuoFern device to the registering mode
(please refer to the relevant instruction manual).
2.
Activate the registering mode on the wall controller, as de-
scribed above.
Both LEDs light up continuously if a multi-channel actuator
is detected.
120 sec.
The registering mode remains active for
approx. 120 seconds.
3.
Accepting the first channel (log on):
Tap on any random button briefly (< 5 seconds).
If the accept command is successful, the
green LED
flashes
three times.
or
Skipping the first channel:
Press and hold any random button for 5 seconds.
If the skip command is successful, the
red LED
flashes three
times.
If the command to accept or skip a channel is successful, both
LEDs light up again continuously.
4.
Accept or skip the second channel.
Proceed as described in point 3.
5.
Log on the next DuoFern device.
9.1 Logging on DuoFern Devices
i
