25
1145094-W2-D
3.
Fit the backplate over the mixer and mark the positions of the four fixing holes
in the orientation shown. The upper screw hole should be located vertically
above the valve.
4.
For solid walls drill four 6 mm holes for the wall plugs. for other types of wall
structure alternative fixings may be required (not supplied).
Caution!
Make sure that you do not drill into pipework in the wall.
5.
Insert the wall plugs and attach the backplate to the wall with the screws
provided.
6.
Fit the concealing plate with the cut-out at the bottom over the backplate until
it clicks into position.
7.
Locate the bearing in the chrome trim with the lug in the 8 o’clock position,
8.
Align the control lever as shown. Make sure that the green hub is turned fully
clockwise and then fit the control lever in the 6 o’clock position.
9.
Tighten the grubscrew with the 2.5 mm hexagon wrench (supplied).
10.
Before using the Shower, refer to section:
‘Commissioning’
.
11.
Install the blanking plug to conceal the grubscrew.
Control Lever
Bearing
Lug
Concealing Plate
Backplate
Flat
Chrome Trim
Summary of Contents for V12
Page 2: ...2 1145094 W2 D...
