18
2.
Carefully remove the concealing cap, unscrew the grubscrew using a 2.5 mm
hexagonal key (supplied) and pull off the control lever.
3.
Unscrew the hub retaining screw with a 2.5 mm hexagon key.
Note!
Do not remove the
hub.
4.
Insert the 2.5 mm hexagon key into the centre of the spindle and engage with
the recessed temperature adjusting screw.
5.
Rotate the hexagon key until the required maximum temperature is obtained
at the tap outlet. Anticlockwise to increase the temperature, or clockwise to
decrease the temperature (
¼
turn = approximately 1°C).
Maximum Temperature Setting
Control
Lever
Hub Retaining
Screw
Hub
+
-
2.5 mm
Hexagonal Key
2.5 mm
Hexagonal Key
Grubscrew
Concealing Cap
1
2
6.
Once the desired maximum blend temperature has been achieved turn off the
tap control by rotating the hub fully clockwise.
Note!
Do not remove the
hub.
7.
Refit the hub retaining screw.
8.
Refit the control lever.
9.
Push the control lever down (1), and tighten the grubscrew (2) and refit the
concealing cap.
10.
Check that the temperature is correct.
Summary of Contents for Safetherm
Page 27: ...27 NOTES...
